Residential · Fayetteville, AR
Apex Asphalt Fayetteville installs and repairs asphalt aprons that take daily tire loads, turning movements, and water runoff at the driveway or lot entrance. Since 2016, we have built clean tie-ins, strong bases, and smooth transitions that hold up and look right in Fayetteville.
A durable asphalt apron starts with correct prep and base work, not just a fresh topcoat. We sawcut and remove failed asphalt as needed, then grade for drainage, proofroll soft areas, and install compacted aggregate base (often 4-8 inches depending on subgrade and traffic). Our crew compacts in lifts with a vibratory plate and roller, stabilizes edges, and uses tack coat at tie-in joints so the new mat bonds to existing pavement and does not shear at the seam.
Northwest Arkansas weather swings and clay-heavy soils can move a driveway entrance fast if water is allowed to sit or run under the mat. We shape the apron to shed water away from the garage, sidewalk, and slab edges, then place hot-mix asphalt and compact to a tight, even surface. Finish options include a clean hand-luted edge along concrete, a smooth roller finish for cars and trailers, and careful transitions to curb, gutter, or existing asphalt so you do not get a tire-bump or a low spot that holds water.
Fayetteville customers choose us because we treat an asphalt apron like a structural section, not a cosmetic patch. You get a licensed and insured contractor, experienced with commercial entrances, residential driveways, and parking lot approaches where turning forces and braking are highest. We show up with the right equipment for the job, including saws for straight cuts, skid steer for excavation and base placement, and steel drum rollers for proper density, so the finished apron performs under real use.
Before we leave, we walk the work with you and confirm slope, transitions, and joint lines, then clean up loose aggregate and debris. You receive a clear written estimate, straightforward scope, and practical care guidance, including when to drive on it, when to sealcoat, and how to avoid edge damage while the asphalt cures. If we are repairing, we explain what failed, whether it was base loss, edge breakup, or water intrusion, and what we did to correct it so you are not paying for the same problem twice.
Yes. We provide a free written estimate after an on-site evaluation of drainage, base condition, and the type of cracking or failure.
Many residential driveways can take light vehicle traffic within about 24-48 hours depending on weather and mix temperature, but asphalt continues to cure and harden over time. We will give you site-specific guidance at the walkthrough.
Often, yes. We can saw-cut and remove failed areas, rebuild the base, and install a hot mix asphalt patch, then recommend crack sealing or an overlay if the surrounding pavement is near the end of its service life.
No. Sealer is a protective coating, not a structural repair. Cracks should be sealed and potholes patched correctly before sealcoating for the best results.
Yes. We handle parking lots, private drives, and common areas, and we can plan phased work to keep traffic moving and reduce downtime.
An asphalt apron is the high-stress strip of pavement at a driveway, parking lot entrance, or shop approach where vehicles turn, brake, and track water and gravel. When it cracks, ruts, or settles, the damage usually starts below the surface, with weak base, poor compaction, or drainage that washes out support. Apex Asphalt Fayetteville installs new asphalt aprons and repairs failed ones with base correction, clean sawcut edges, and proper hot-mix placement so the entrance transitions smoothly and carries load without breaking apart.
Apron problems show up as edge breakup, alligator cracking, potholes at the throat, or a lip where new meets old. For repairs, we typically square up the area with sawcuts, remove unstable material, rebuild the base, then place a compacted hot-mix asphalt patch with tight joints. For new construction or full replacement, we excavate to the right depth, install and compact a graded stone base, then pave to an appropriate thickness for the traffic, whether that is passenger vehicles, delivery vans, or light trucks.
Drainage and transitions matter as much as thickness. We set grades so water does not pond at the sidewalk, slab edge, or gate line, and we match existing elevations to prevent scraping and tire impact. Edges are supported and sealed at the interface with existing asphalt or concrete, reducing the common failure where water enters at the joint and undermines the base.
If you need an asphalt apron in Fayetteville, we will look at traffic type, subgrade stability, and water flow before recommending a fix. You will get a written plan that spells out removal, base depth, asphalt thickness, and what is included, with clear scheduling and cleanup. Contact Apex Asphalt Fayetteville to get an asphalt apron that drives smoothly and stays intact.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Fayetteville. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
